H MAKING, RECEIVING & ENDING A CALL
To make a call
1.Enter the area code and phone number.
2.Press [ 
].
To answer a call
1.Press [ 
]. If your phone is set to “Slide open” for “Call answer options”, simply open the phone to answer a call. If your phone is set to “Slide open+talk key” for “Call answer options”, simply open the phone or press
[ 
] to answer a call. If your phone is set to “Slide open+any key” for “Call answer options”, simply open the phone or press any key to answer a call. For information on how to set your Call Options, see page 19.
To end a call
1.Press [ 
].
Once the call is completed, a call summary appears.
To reject a call
1.Press [ 
] twice or Ignore.
To make a call using call list
Your phone logs up to 270 outgoing, received and missed call numbers.
1.In standby mode, press [ 
] to display the All Calls list.
2.Select a number.
3.Press [ 
] to dial the selected number.
Note:
•To redial the last number in the All Calls list, press
[ 
] twice.
•After 270 received, outgoing or missed calls, the oldest call will automatically be erased from the history.
To make a call using contacts
1.In standby mode, press Contacts to access the Contacts list. Select the desired phone number
then press [ 
].
To adjust the call volume
1.During a call, press Side volume key up or down to adjust the earpiece volume.
To insert a Time/Hard Pause feature
Pauses are used for automated systems (i.e., Voicemail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause.
This feature is useful for dialing into systems that require a code.
1.Enter a phone number and then press Options. Select either Hard pause (“P”) or Time pause (“T”).
2.Press [ 
] to dial, or press Save to save the number.
To switch between two calls
1. Press [ 
].
To reply to a missed call
1.Press Now to display the list of missed calls.
2.Select a number to call by using the navigation key to scroll [ 
] or [ 
].
3.Press [ 
].
To answer a second call
1.Press [ 
]. The first call is automatically put on hold.
2.Press [ 
] to end the second call.
The call on hold is automatically reconnected.
H ADJUSTING MASTER VOLUME
To adjust the master volume:
1.In standby mode, press Side volume key up or down.
2.Select Silence All, Vibrate, Level 1 ~ Level 5 or Level 5 + Vibrate > Select.
H CALLER ID
Identifies caller by displaying their phone number.
If the caller’s name and number are already stored in your contact list, their name will appear. The caller ID is stored in the Recent Calls Menu.
H CALL WAITING FUNCTION
Notifies you of a received call when you are already on a call by sounding a beep tone and displaying the caller’s phone number.
To answer another call while on the phone,
press [ 
]. This places the first call on hold. To
switch back to the first caller, press [ 
] again.
HSPEAKERPHONE
The speakerphone feature lets you hear audio through the speaker and talk without holding the phone.
To activate the speakerphone in idle mode, press
[
]. To activate the speakerphone while on a call, press [ 
] first.
H VIBRATE MODE ON/OFF
In standby mode, press and hold [ 
] to turn Vibrate mode On/Off. In Vibrate Mode, all phone sounds are turned off and the phone will vibrate to notify you of an incoming call or message.
H USING AUTO KEYPAD LOCK FUNCTION
When the slide is closed, the touch keypad and Navigation Key are automatically locked. If you want to use the touch keypad and Navigation Key, press and hold any side keys, then press and hold OK.
H MAKING AN EMERGENCY CALL
The 911 feature automatically places the phone in Emergency Call Mode when you dial the preprogrammed emergency number, 911.
To make a 911 call in Lock Mode
1. Enter “911” and then press [ 
].
16 Calls & Contacts | Calls & Contacts 17 |
