Telephone’s Analogue Adapter – UTStarcom | pag.4 |
EQUIPMENT PHYSICAL CONNECTION
First of all, you have to make the physical connection of the equipment, following the simple instructions hereafter included:
Internet 
insert the
connect the other end of the cable to the Ethernet port of your personal computer
connect the analogue telephone to the ATA’s “PHONE1” port
if you have subscribed a VoIP second line, connect another analogue telephone to the ATA’s “PHONE2” port
connect the power adapter provided with the
insert the Ethernet cable to the WAN port of the
connect the other end of the cable to your LAN (Hub/Router).
At the end of the connections, the “PWR”, “WAN”, “ENET”, and “VoIP” LEDs will light:
PWR: Lighted shows that the ATA is powered by the wall socket.
ENET: Lighted shows that the “physical” connection between your PC and the ATA is working correctly. Blinking when data is being transmitted or received from or towards your PC.
WAN: Lighted shows that the “physical” connection between the ATA and the ADSL modem is working correctly. Blinking when data is being transmitted or received:
VoIP: Lighted shows that you are registered to the VoIP service of Eutelia and that you can make a calls.
LINE1/2: Blinking when call is being received or transmitted.
