Valcom V-2960A specifications Introduction, Specifications, Installation, Mounting

Models: V-2960A

1 2
Download 2 pages 62.62 Kb
Page 1
Image 1

www.class-connection.com

Issue 0

V-2960A

NTSC Color Video Camera

Introduction

The V-2960A is a NTSC Format, Color Video Camera designed for use with the Valcom Class Connection Baseband Video System. The V-2960A is wall mountable or may be mounted on a single gang electrical box.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference requiring the user to incur expense to correct the interference.

Specifications

Features

Manually adjustable focus, pan and tilt

Output matched for use with twisted pair cable

Centrally powered from headend equipment; No remote power supply required

Connections made via an RJ-45 jack

Environment:

Temperature:

0 to + 40°C

Humidity:

0 to 80% non-precipitating

For indoor use only.

 

Installation

All necessary connections are made via the RJ-45 connector on the camera. Cable pin outs from the top of the plug:

W/O

N/C

O/W

N/C

W/G

Ground

BL/W

+24VDC

W/BL

+24VDC

G/W

Ground

W/B

Video +

B/W

Video –

Dimensions/Weight

Camera mounted in bell box with faceplate: 4.63" H x 2.80" W x 2.00" D (11.76cm H x 7.11cm W x 5.08cm D)

1 lb. (.45 kg.)

Nominal Specifications

Power requirements:

24VDC, 40mA

Output Impedance:

100 Ohms

Video format:

NTSC

Focal length:

4.6mm

Max Aperture:

f2.8

Mounting

Install the V-2960A per figure 1. Bend the mounting bracket to adjust pan and tilt as required. Insert a small screwdriver into the slots on the lens assembly of the camera and turn the lens to adjust the focus if necessary. The V-2960A enclosure features top and bottom knockouts to accommodate cable routing.

1

947983

Page 1
Image 1
Valcom V-2960A specifications Introduction, Specifications, Installation, Mounting