14
INSTALLATION
Installing Logs (Cont.)
Optional Wireless
INSTALLATION
Continued
2.Install fireplace insert screen by slipping notches of fireplace insert screen over screws on front of fireplace insert (see Fig- ure 26).
WARNING: You must operate this fireplace insert with the fireplace insert screen in place. Make sure fireplace insert screen is in place before running fireplace insert.
One Piece Log Set
Burner
Ports
Figure 25 - Installing One Piece Log Set (Top View)
Screws for
Mounting
Screen
Notches
OPTIONAL WIRELESS
GHRCTA)
Installing Remote Receiver Unit
1.Disconnect switch wires from the control valve.
2.Remove screws attaching switch plate.
3.Remove switch plate (see Figure 27). Discard after removing.
4.Install remote receiver unit onto gas log heater base using mounting clips.
5.Push clips firmly into place (see Figure 28).
6.Connect wires as shown in Figure 29.
Remote
SwitchIgnitor
Bracket
Screw
Switch Plate | Wires |
Figure 27 - Switch Plate and Wiring Harness
Mounting
Clips
Remote Receiver
Figure 28 - Installing Remote Receiver
Figure 26 - Installing Fireplace Insert Screen
White Wire
From Receiver
Red Wire | Valve |
From | |
Receiver |
|
Figure 29 - Connecting Wires |
|
For
.
.com
