INSTALLATION
Remove all packaging before positioning the machine.
Positioning
If possible, position the machine next to a water tap and a drain.
The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation .
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on the spacers on either side of the cabinet.
Installing and Securing the Machine Under a Kitchen Unit
By removing the machine's worktop, you can install it under a close fitting sink unit or a
Then proceed as follows:
Remove the machine worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.
570⎟ |
600 |
820 |
IN06 |
IN07 |
600 |
IN05 |
Insert the machine after adjusting the height and level- ling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
Caution
If the door does not close correctly, loosen or tighten the adjustable support feet, until the machine is perfectly level.
IN01 |
Adjusting the Worktop
You can move the worktop forward or backward by 25
mmin order to align the machine with other kitchen units.
Simply unscrew the two front retaining screws, move the top to the required position and then retighten the
screws. |
IN03 |
Once the machine has been installed, ensure that it is easily accessible for servicing.
PIN20GB
4
