INSTALLation
Continued
Blower Bracket |
| Wire Harness | |
Assembly |
|
| |
Screw |
|
| |
Switch Plate | Power | ||
Switch | |||
Cord |
| ||
|
| ||
|
| Outlet | |
3 |
| Receptacle | |
2 |
|
| |
1 |
|
| |
Red |
|
| |
Blue |
|
| |
Plastic |
|
| |
Wire Strap |
|
| |
Valve |
|
| |
Cover |
| Wire | |
Shield |
| ||
Clamp Connector | Harness | ||
Box Cover | |||
(not included) |
|
|
Figure 20 - Installing Blower Bracket
Assembly
Extension Cord
Use extension cord if needed. The cord must have a
CONNECTING TO GAS SUPPLY
WARNING: This appliance requires a 45° male flare fitting
WARNING: A qualified service person must connect fireplace to gas supply. Follow all local codes.
CAUTION:Neverconnectpro- pane/LP fireplace directly to the propane/LPsupply.Thisfireplace requires an external regulator (notsupplied).Installtheexternal regulator between the fireplace and propane/LP supply.
WARNING: Never connect natural gas fireplace to private
For propane/LP units, installer must supply an external regulator. The external regulator will reduce incoming gas pressure. You must reduce incoming gas pressure to between 11" and 14" of water. If you do not reduce incoming gas pressure, fireplace regulator damage could occur. Install external regulator with the vent pointing down as shown in Figure 21. Pointing the vent down protects it from freezing rain or sleet.
CAUTION: Use only new, black iron or steel pipe. Internally
Propane/LP
Supply TankExternal
Regulator
Vent
Pointing
Down
Figure 21- External Regulator with Vent
Pointing Down
16 | www.desatech.com |