®

NATURAL GAS RESIDENTIAL HEATERS

ASSEMBLY

Continued

5.

Slide other end of adjusting plate/shim

 

in slot on mitered edge of side brass

 

trim (see Figure 5).

6.

While firmly holding edges of brass

Log

Front Panel

Sheet Metal

 

 

Screw

Truss-

Head

Screw

Nut

Deflector

Heater

Cabinet

Hood

Log

Retaining

Brackets

Burner Shield

Screw

 

trim together, tighten both set screws

 

on the adjusting plate with slotted

 

screwdriver.

7.

Repeat steps 1 through 6 for other side.

8.

Place the assembled trim on front of

 

heater cabinet. Attach on top and sides

 

with four brass screws included in hard-

 

ware package (see Figure 6).

9.

Reattach front panel to heater if you are

 

going to mount the heater to the base.

 

Do not reattach front panel at this time

 

if you are going to mount heater to wall.

Top Brass

Adjusting Trim

Side Brass Plate

Trim

Brass Front Trim

Screen

 

Screw

Set Screws

Figure 3 - Assembling Heater

WARNING: Always have burner shield and screen in place before operating heater. This pre- vents excessive temperatures on heater surfaces.

Failure to position the parts in accordance with these diagrams or failure to use only parts spe- cifically approved with this heater may result in property damage or

Brass Front Trim

Truss-Head Screw

Front Panel

Nut

Shim

Slot

Slot

Mitered Edge

Figure 5 - Assembling Brass Trim

Screws

Assembled

Brass Trim

personal injury.

Figure 4 - Attaching Brass Front Trim to Front Panel

Attaching Brass Front Trim to Front Panel

1.Locate brass front trim in brass trim package.

2.Slide the head of two truss-head screws from hardware packet into each end of brass front trim (see Figure 4).

3.Line up screws with holes in front panel (see Figure 3). Insert screws in holes. Attach nuts from inside of front panel. Tighten with wrench.

Assembling and Attaching Brass Trim

1.Remove packaging from remaining three pieces of brass trim.

2.Locate four brass screws, two adjust- ing plates with set screws, and two shims in the hardware packet.

3.Align shim under adjusting plate as shown in Figure 5.

4.Slide one end of adjusting plate/shim in slot on mitered edge of top brass trim (see Figure 5).

Figure 6 - Attaching Brass Trim to Heater

For more information, visit www.desatech.com

4

107101

Page 4
Image 4
Vanguard Heating VMH3000TNSA Attaching Brass Front Trim to Front Panel, Assembling and Attaching Brass Trim

VMH3000TNSA specifications

The Vanguard Heating VMH3000TNSA is a state-of-the-art heating solution designed to provide optimal warmth and comfort in various settings. This model, part of Vanguard's advanced heating line, stands out with its impressive blend of efficiency, technology, and user-friendly features.

One of the key highlights of the VMH3000TNSA is its powerful heating capacity. The unit is capable of delivering up to 3000 watts, making it suitable for larger spaces. This high output ensures that even in the coldest climates, users can enjoy a consistently warm environment. Its ability to rapidly heat up a room is a significant advantage, especially during the winter months.

Efficiency is another crucial feature of the VMH3000TNSA. It incorporates advanced heating technology that maximizes energy consumption. The unit is designed to provide heat with minimal energy use, thus helping to reduce electricity bills while still maintaining a comfortable temperature. This eco-friendly approach is perfect for those who are looking to minimize their environmental footprint without compromising on comfort.

The VMH3000TNSA is equipped with an intelligent digital thermostat that allows for precise temperature control. Users can easily set their desired temperature and let the unit automatically adjust its output to maintain that level. This feature not only enhances convenience but also contributes to energy savings, ensuring that the heater does not overwork itself.

Safety is a paramount concern with any heating device, and the Vanguard VMH3000TNSA does not disappoint. It features a built-in safety shut-off mechanism that automatically turns the unit off if it overheats. Additionally, the design includes cool-touch technology, ensuring that the exterior of the heater remains safe to touch, preventing accidental burns.

The unit is designed for ease of use and portability. It comes with integrated handles and a lightweight construction, allowing users to effortlessly move the heater from one room to another. This flexibility is particularly beneficial for individuals who want to heat specific areas of their home without having to invest in multiple heaters.

In terms of design, the VMH3000TNSA boasts a modern and sleek appearance that fits seamlessly into any home decor. Its compact size means it doesn’t take up much space, making it ideal for apartments and smaller homes.

Overall, the Vanguard Heating VMH3000TNSA is a top-tier heating solution that excels in performance, efficiency, safety, and design. Whether you are looking to heat a large living space or need a reliable unit for your office, the VMH3000TNSA stands as a versatile and effective choice to keep you warm throughout the colder months.