OWNER’S MANUAL

INSTALLATION

Continued

Mounting Heater to Optional Hearth Base

1.

Lay heater on its back on a table with

 

the bottom of heater overhanging the

 

edge of the table.

2.

Remove 2 shipping screws in bottom

 

of heater. Discard shipping screws.

3.

Line up mounting holes on top of hearth

 

base with holes in bottom of heater (see

 

Figure 18).

4.

Using a Phillips screwdriver, secure

 

hearth base to heater with four sheet

 

metal screws (see Figure 18).

5.

Stand heater up on base.

6.

Place hearth insert in hearth base as

 

shown in Figure 19.

7.

Assemble brass trim (see steps 1

 

through 7 under Assembling and At-

 

taching Brass Trim, page 4).

8.

Slide base trim on heater base. Attach

Securing Hearth Base to Floor

1.Position hearth base in desired location. Mark holes for drilling (See Figure 18). Remove hearth base.

2.For carpeted floor, make a small cut with a sharp knife at marked locations before drilling.

If securing to a wood floor, drill a 3/4" deep hole using a 1/8" diameter drill bit. Do not use anchors in wood floors. If securing to a concrete floor, drill a 1 3/8" deep hole using a 1/4" diameter concrete drill bit. Completely insert anchors into each hole.

3.Mount heater to hearth base following steps under Mounting Heater to Op- tional Hearth Base. After mounting heater, position heater and hearth base over drilled holes. With slotted screw- driver, secure hearth base to floor with four wood screws.

C. MOUNTING HEATER TO OPTIONAL MANTEL

See Instructions Included With Mantel Kit.

IMPORTANT: Only use the optional man- tels specified in this manual. See Accesso- ries, page 23 for proper mantel kits. This heater is only approved for use with models GMF800/GMU801 series, GM900F/ GM901U series, GM902F/GM903U series, GM700F/GM701U, and GM702F/ GM703U series mantel kits. Using any other mantel will void the A.G.A. approval for this heater. Only use models GMF800/ GMU801 series, GM900F/GM901U series, GM902F/GM903U series, GM700F/ GM701U, and GM702F/GM703U series mantels with this heater. Do not use these mantels with any other product.

brass trim to base with two brass screws

included as shown in Figure 19.

Shipping Screw

Bottom of Heater

Base

 

Mounting

 

Holes

Holes for Securing

Sheet Metal

Heater to Floor

Screw

Figure 18 - Attaching Heater to Hearth Base

Hearth

Insert

Screw

Brass Base

Trim

Figure 19 - Placing Hearth Insert on Heater

Base and Attaching Brass Base Trim

Continued

106056

11

Page 11
Image 11
Vanguard Heating VMH3000TPS installation manual Mounting Heater to Optional Mantel, Mounting Heater to Optional Hearth Base

VMH3000TPS specifications

The Vanguard Heating VMH3000TPS is a state-of-the-art heating unit designed to provide efficient and reliable warmth for residential and commercial spaces. This model stands out for its exceptional performance, advanced technologies, and user-friendly features that cater to diverse heating needs.

One of the main features of the VMH3000TPS is its powerful heating capacity. With a robust output, it can effectively heat large areas, making it suitable for open-plan homes, offices, and industrial spaces. The unit operates quietly, ensuring that users can enjoy a comfortable environment without the disruptive noise often associated with heating systems.

The VMH3000TPS incorporates cutting-edge energy efficiency technologies. It is engineered to consume less energy while delivering optimal performance, which translates into lower utility bills and a reduced carbon footprint. This model features advanced insulation materials that minimize heat loss and allow the unit to maintain a consistent temperature throughout the space.

Another notable characteristic of the VMH3000TPS is its smart control system. Users can easily adjust the temperature settings through a user-friendly digital interface. This includes programmable schedules that enable users to set heating times according to their preferences. Additionally, the unit is compatible with smart home systems, allowing for remote access and control via smartphones or other devices.

Safety is a top priority in the design of the VMH3000TPS. The unit is equipped with multiple safety features such as overheat protection, tip-over switches, and flame failure devices. These ensure that the heater operates safely in all conditions, providing peace of mind to users.

Moreover, the VMH3000TPS is built with durability in mind. Constructed from high-quality materials, it is designed to withstand the rigors of daily use while maintaining aesthetics. The sleek, modern design allows it to blend seamlessly with any décor, making it an attractive addition to any space.

In summary, the Vanguard Heating VMH3000TPS is a high-performance, energy-efficient heating solution that combines advanced technology with user-friendly features. With its powerful output, smart controls, and emphasis on safety and durability, it is an excellent choice for anyone looking to improve their heating system. Whether for home or commercial use, the VMH3000TPS promises to deliver comfort and efficiency throughout the heating season.