Vanguard Heating VP2000BTC Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws

Models: VP2800BTC VP2000BTC

1 32
Download 32 pages 56.58 Kb
Page 13
Image 13

INSTALLING TO WALL

Continued

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings. IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Figure 10 - Popping Open Anchor Wings For Thin Walls

5.Place mounting bracket onto wall. Line up last hole on each end of bracket with wall anchors.

6.Insert mounting screws through bracket and into wall anchors.

7.Tighten screws until mounting bracket is firmly fastened to wall.

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater.

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Stand-Out Tab

Horizontal Slots

Mounting Bracket (attached to wall)

Figure 11 - Mounting Heater Onto Mounting Bracket

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 12).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 12.

If installing bottom mounting screw into wall stud, drill holes at marked loca- tions using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mounting holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten. Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 14-16).

Figure 12 - Installing Bottom Mounting Screws

103876

13

Page 13
Image 13
Vanguard Heating VP2000BTC, VP2800BTC Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws

VP2800BTC, VP2000BTC specifications

Vanguard Heating has made notable strides in the heating solutions market with its cutting-edge models, the VP2000BTC and VP2800BTC. These units cater to both residential and commercial needs, providing users with efficient heating capabilities under various conditions.

The VP2000BTC is designed with a powerful 2000-watt output, making it suitable for smaller spaces or specific zones within larger environments. It boasts a sleek, modern design that allows for easy integration into any setting, whether it’s a living room, office, or workshop. One of its key features is the advanced thermostat control, which enables precise temperature regulation. This not only enhances user comfort but also contributes to energy efficiency by ensuring that the heating system operates only when necessary.

On the other hand, the VP2800BTC steps up the power to an impressive 2800 watts, making it ideal for larger spaces requiring a more robust heating solution. This model incorporates a multi-functional control panel that allows the user to set timers and customize heating schedules. By doing so, users can optimize their energy consumption, leading to cost savings over time.

Both units utilize infrared heating technology, which offers several advantages over traditional heating methods. Infrared heating warms objects and surfaces directly rather than heating the air, resulting in quicker and more efficient warmth. This technology minimizes heat loss, ensuring that energy is used effectively and providing immediate comfort.

Another noteworthy characteristic of the VP2000BTC and VP2800BTC is their emphasis on safety. Each model comes equipped with overheat protection and a tip-over switch, which provides peace of mind, especially in households with children or pets. Additionally, their lightweight design allows for easy transport and repositioning, making them versatile solutions for various applications.

In summary, the Vanguard Heating VP2000BTC and VP2800BTC are excellent choices for those seeking effective and efficient heating solutions. With their advanced features, precision control, and infrared technology, they stand out as practical options for enhancing comfort in any environment.