JVC LPT0002-027B specifications Basic Connections, Installing Your NEW Record ER EN

INSTALLINGYOURNEWRECORDEREN

3

Basic Connections

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

CHECK CONTENTS

Make sure the package contains all of the accessories

1 listed in “Specifications” (☞ pg. 57).

Aerial terminal

Back of TV

21-pin SCART connector

RF Cable

(provided)

21-pin SCART Cable

AV1 IN/OUT

Mains Power

Cord

TV Aerial

Cable

Rear view

	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
3	CONNECT RECORDER TO TV
	The connection method you use depends on the type
	of TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and
	the TV’s aerial terminal.
	Before operating the recorder, make sure the TV’s
	channel is set to the VIDEO channel (☞ pg. 8).

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the

AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector. If you are using this recorder in Australia or New Zealand, see "For Customers in Australia and New Zealand" on this page.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

AUDIO OUT(put) connectors

Mains outlet For connection to the audio input connctors on a Hi-Fi stereo system

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.

For Customers in Australia and New Zealand

Connect an optional AV cable between the TV's AV-IN terminals and the AV1 IN/OUT connector on the rear panel of the recorder via the provided output cable adapter as illustrated.

TV

Output cable adapter (Provided)

AV cable (Not provided)

Recorder

To AV-IN	To AV1 IN/OUT
terminals
	connector