JVC LPT0002-027B specifications Activate Spatializer, Track USE

16EN

PLAYBACK (cont.)

SPATIALIZER	SHUTTLESCANTIME	Spatializer®
		This feature expands sound field when you play back any stereo
		source or view a stereo programme while recording it.
		*Spatializer® has no effect on recording quality.
		®
		ACTIVATE SPATIALIZER

				8
				1	Press SPATIALIZER; the current setting will be displayed
STOP					on the screen for about 5 seconds. Pressing
	q	1	Á		SPATIALIZER while the screen shows the display
	6		5/8
					changes the setting.

REW FF

A/B CODE		C. MEMORY
	2
1	2	3
4	5	6
7	8	9
C.RESET	0	4

AUDIO MONITOR

FF

REW

STOP

SCENE FINDER 3

●To view a stereo programme such as movies or

music, select "SPATIALIZER " to create more spacious sound.

●To view a monaural programme, select "SPATIALIZER[ST" which simulates a stereo effect.

●Select "SPATIALIZER OFF" to turn off Spatializer® if the sound becomes unnatural with either

"SPATIALIZER " or "SPATIALIZER[ST" selected.

●If your TV is equipped with 3D-PHONIC and if you use both Spatializer® and 3D-PHONIC at the same time, the sound may become unnatural; set either function to "OFF".

●The setting will remain effective even though you turn on/off the recorder.

NOTES:

●Spatializer®is effective only with a stereo TV.

●The setting cannot be changed during search, still, frame-by- frame playback or slow motion mode.

●When this recorder is used as the player for editing, the recorded audio will correspond to the Spatializer® setting.

1

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:

TRACK			USE
Recorder's Front Panel	On-Screen Display
L + R		HI FI	For Hi-Fi stereo tapes
	L	R
L	L	HI FI	For main audio of Bilingual tapes
R		HI FI	For sub audio of Bilingual tapes
		R
NORM		NORM	For audio-dubbed tapes
L + R + NORM		HI FI	For audio-dubbed tapes
		NORM

NOTES:

●"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 26.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 24).