JVC LPT0002-027B SET Input Mode, Locate Start Point, Engage Audio Dubbing, Start Dubbing

		E	N	37
	Audio dubbing replaces the normal audio sound of a previously
Audio Dubbing recorded tape with a new soundtrack.
	Normal audio track	Pre-recorded tape

DUB	PLAY
A.
		8
6		5/8
q	1	Á

PAUSE STOP

CD Player

CD Player

Mixer output Audio mixer

Original sound

AUDIO OUT

		8
6		5/8
q	1	Á

NOTES:

● When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound (Hi-Fi + Normal soundtracks), press AUDIO MONITOR on the remote control to select "L+R+NORM" (☞ pg. 16).

● Audio dubbing stops automatically when the counter reaches "0:00:00", and the recorder enters the Play mode. Check the counter reading before dubbing.

● Audio dubbing is also possible using the rear panel AV1 IN/ OUT or AV2 IN connector. When using these connectors, make sure to select the correct input mode in step 2.

● Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.

● When playing back an audio-dubbed tape, press AUDIO MONITOR on the remote control to select the soundtrack you wish to hear (☞ pg. 16).

Video/Hi-Fi audio track

Audio-dubbed tape

MAKE CONNECTIONS

1 Connect an audio component to the AUDIO IN L + R connectors on the recorder's front panel.

●When connecting monaural equipment, use only the recorder's AUDIO IN L connector.

2	SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG. so that "F-
	AU" appears in place of a channel number.
	LOCATE START POINT
	Press PLAY to start playback of the tape in your
	recorder, and press PAUSE when you find the point
3 where you want to start dubbing.
4	ENGAGE AUDIO DUBBING
	Press A. DUB.
	● Your recorder enters the Audio Dubbing Pause mode.
	("	" blinks, "	" and " " light up on the front
	display panel.)
	● To perform audio dubbbing with audio mixing, press
	AUDIO MONITOR on the remote control to select "L
	+ R" at this point. *Audio dubbing with audio mixing
	is not possible if you're using a monaural audio
	component, or if you don't have an audio mixer.
	START DUBBING
	Engage the audio component's Play mode, then press
	PLAY to start the tape in your recorder. Audio dubbing
5 begins at this point.
	● "	" blinks and "	" is displayed on the front
	display panel.
	● To stop dubbing temporarily, press PAUSE. Press
	PLAY to resume dubbing.
	END AUDIO DUBBING
	Press STOP to stop the tape in your recorder, and
6 engage the audio component's Stop mode.