Vantec manual Installation, Installing two hard drives into the NexStar MX Dual

5. Installation:

NexStar MX – Dual 3.5” SATA HDD Enclosure

5.1. Installing two hard drives into the NexStar MX Dual:

(1)Release the four screws then pull out the rear panel and tray of the NexStar MX Dual (Figure 5-A)

( Figure 5-A )

(2) Select Operation Mode by switching jumper. ( Figure 5-B )

Jumper Switch

( Figure 5-B )

1 2

3

Installation

6