Vantec None manual Driver Installation

Installing the SATA/IDE-USB Adapter for external use with 2.5” / 3.5” SATA Hard Drive:

1.Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to the SATA connector on the hard drive hard drive.

2.Connect Power Cable to Power Adapter. Plug Power Cable into a live outlet.

3.Connect Power Adapter to hard drive. If your drive does not have a 4-pin power connector, you will need to use a SATA power adapter.

4.Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port.

2.5” SATA HDD 3.5” SATA HDD

Driver Installation:

No drivers are necessary when using Windows ME/XP/2000. If the hard drive does not appear under My Computer, make sure the drive is properly partitioned and formatted.

7