4. Installation :
All in 1 Multifunction Internal Card Reader
(5-1) Please remove the side panels of the case to gain access to the chassis. Once inside, remove the 5.25" front panel where you wish to place the card reader. ( Figure 5-A )
( Figure 5-A )
(5-2) Insert the UGT-955-BK into the 5.25" bay as shown in the figure. ( Figure 5-B )
( Figure 5-B )
(5-3) Tighten the screws of both sides. ( Figure 5-C )
( Figure 5-C )
(5-4) Plug two SATA cables(Red) into the SATA ports on the motherboard. ( Figure 5-D )
(SATA Cable)
SATA
( Figure 5-D )
