Varimixer specifications W80A Food Mixer, Standard Features, Options, Accessories, Models

W80A Food Mixer

Project

Item

Quantity

CSI Section 11400

Approval

Date

W80A

Models
W80A
		Standard Features		Options &
		• Powerful 4 hp motor		Accessories
		• Variable speeds from 50 to 250 RPM
				40-qt. bowl and accessories
		• By manually operating a single lever, the
				Bowl scraper in 80-qt. and 40-
		bowl raises and locks in position.
				qt. sizes
		• Overload protection and no voltage
				Stainless steel wing whip
		release
				Pastry knife
		• No bowl adaptors required for the down-
				Bowl Truck with handle
		size bowls
				Vegetable slicer and shredder
		•#12 attachment hub with 198 rpm speed
				plates
		• Locking pin on tools instead of shaft.
				Power Bowl Lift
		• Neoprene feet to minimize walking and
				Meat grinder
		rusting
				Mark IV programmable
		• Permanently lubricated planetary head
				controls
		and attachment hub case
				Ergo (tall column)
		• 15-minute timer with HOLD feature
		• Stainless steel 80-qt. bowl, wire whip and
		dough hook
		• Alloy flat beater
Specifications
Mixing system			speed V-belt transmission based on precision
The VARIMIXER W80A is a planetary mixer with			machined cast iron pulleys. Springloaded
a variable speed drive system. The mixer frame			moveable pulleys in the variable speed drive
consists of a column with welded-on feet, and			for automatically adjusting of the tension of
a top traverse closed by a stainless steel cover.			the special V-belt. Planetary mixer head of
The bowl is mounted in bowl arms which are			unique design. The planetary head revolves in
manually raised and locked simultaneously - or			heavy-duty ball and needle bearings around
lowered and opened, respectively. The column			the main shaft. Precision milled beveled gear
contains the motor and the bowl arm mecha-			on the main shaft engages the bayonet shaft
nism. The top traverse contains the transmis-			and the fixed internal gear ring through a
sion system consisting of the moveable pulleys,			double set of milled gears obtaining extra high
the intermediate belt drive and the planetary			torque capabilities of the mixing tools.
head. Start and stop push buttons are mounted			Precision milled cast iron bowl arms lower and
on the frontplate along with a 15-minute			raise the bowl and clamp it in a precise position
electrical timer with a HOLD feature. Mixing			relative to the mixing tool allowing for small
tools are mounted in a bayonet shaft in the			tolerances between tool extremities and the
planetary head.			bowl.
Construction			Attachment drive directly coupled to the motor
Mixer frame of heavy-gauge, welded, rolled			securing maximum power output to the meat
steel plate. Durable powder coated finish			grinder or vegetable cutter. The 198 rpm high
used on those surfaces not constructed of			speed and the powerful motor give the meat
stainless steel. Top cover, splash apron and			grinder an unusually high capacity in relation
planetary head cap in heavy-gauge stainless			to the size of the mixer.
steel. Molded PVC feet pads. Bowls in stainless
steel. Mixing tools in cast aluminum or stainless
steel. Bayonet shaft in stainless steel. Variable
5489 Campus Drive	Tel: 318-219-7051		www.varimixer.com
Shreveport, LA 71129 USA	Tel: 1-800-222-1138		Bulletin No. W80A 09/07
	Fax: 318-635-3131
	E-mail: mix@varimixer.com

Food Mixer