Vax V-008 Accessories, Dirt Container & Filter Removal & Replacement, TurboTool, Extension Tube

Models: V-008

1 9
Download 9 pages 40.3 Kb
Page 4
Image 4
To Operate Self-Propelled Feature (V-008SP only)

Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 6

How to Operate/Accessories

Accessories/Dirt Container & Filter: Removal & Replacement

To Operate Self-Propelled Feature (V-008SP only)

1.For everyday use, engage the self-propelled feature by turning the switch up to “ON” position (Fig.4/6A). Grasp hand grip and push vacuum cleaner (Fig.4/6B).

5. Accessories Pull

Push Reverse

Forward

Fig.4/6

2.“Self-Propelled” feature will work as the vacuum cleaner is pushed forward and pulled backward (Fig.4/7).

5. Accessories

1.The vacuum cleaner must be in the upright position to raise the brushbar (Fig.4/9).

Fig.4/9

2. Remove the hose from the tool caddy (Fig.4/10).

Fig.4/12

TurboTool™

The TurboTool™ fits on the end of the extension tube or hose. Perfect for cleaning stairs and upholstery. The TurboToool™ should be pulled backward for optimum cleaning (Fig.4/13).

6.Dirt Container & Filter: Removal & Replacement

WARNING: To reduce the risk of injury from moving parts unplug before servicing.

NOTE: Unplug the vacuum cleaner before changing the filter.

NOTE: For best performance, replace filter annually.

1.Press the latch above the dirt container and remove the dirt container from the vacuum cleaner (Fig.6/1).

Fig.4/10

Fig.6/1

2.Remove the dirt container lid by turning it anti- clockwise (Fig.6/2).

Fig.4/7

To Disengage Self-Propelled Feature (V-008SP only)

To disengage the self-propelled feature turn switch slightly to the right to the “OFF” position (Fig.4/8).

Fig.4/8

3.Choose any of the handy on-board accessories or use the hose alone. Simply push the attachment firmly onto the end of the extension tube or hose handle. To remove the tool, twist and pull apart gently (Fig.4/11).

Fig.4/11

Extension Tube

If additional length is needed, use the extension tube and/or crevice tool. Pull the crevice tool out of the extension tube or hose handle. To remove the tool, twist and pull apart gently.

NOTE: The crevice tool is stored inside the extension tube (Fig.4/12).

Fig.4/13

Carry Handle

Use the carry handle on the back of the vacuum cleaner to move the vacuum cleaner from room to room (Fig.4/14).

NOTE: Check that the dirt container is securely in place before lifting the vacuum cleaner.

Fig.4/14

Dusting brush: for delicate surfaces and skirting boards.

Fig.6/2

3.Hold the dirt container and grasp the top of filter. Twist and pull the filter up and out (Fig.6/3).

Fig.6/3

Crevice tool: for crevices, corners and cracks, etc.

6

7

Page 4
Image 4
Vax Accessories, Dirt Container & Filter Removal & Replacement, To Operate Self-PropelledFeature V-008SPonly, TurboTool