Putting your cleaner together | Charging |
| NOTE: Only use the charger supplied. |
| CHARGE 24 HOURS BEFORE FIRST USE. |
Top view of cleaner
Notch
3
To assemble the handle: | To disassemble the handle: Use a ball point | Connect the charger to a wall socket. | Plug the charger end into the side of the unit. |
Insert the handle into the body of the unit and | pen to push the button in while pulling the handle | NOTE: Charge for 24 hours before first use. |
|
push down firmly until it locks into place. Be sure | up and out of the body of the cleaner. |
| NOTE: The indicator light will come on to |
to line up the button on the handle with the notch |
|
| indicate that the appliance is charging. Unit |
on the body, to help guide the lower handle into |
|
| will be charged in |
the body. The pin should be visible in the hole on |
|
| not change colour when the unit is charged. |
the body. NOTE: The vacuum may turn on during |
|
|
|
handle assembly. To turn the vacuum off, press |
|
|
|
the trigger on the handle once. |
|
|
|
|
|
|
|