Troubleshooting, Battery Disposal, Vax Care, Problem

Troubleshooting

WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING.

Cleaner won’t run

Cleaner won’t pick-up/loss of suction

Cleaner won’t spray solution

Dust escaping from cleaner

1.Battery not charged.

2.Handle not pushed into housing.

3.Battery dead - won’t hold a charge.

4.Needs service.

1.Dust canister full.

2.Filter dirty.

3.Battery charge getting weak.

4.Hose clogged.

1.Battery charge getting weak.

2.Nozzle clogged.

3.Solution tank not fully engaged.

4.Solution tank empty.

1.Dust canister full.

2.Filter dirty.

1.Charge battery. For first use, charge for at least 24 hours.

2.Make sure handle is pushed firmly all the way into housing and pin is visible in the hole in the body.

3.Call VAX CARE on 0870 6061248.

4.Call VAX CARE on 0870 6061248.

1.Empty dust canister

2.Remove filter and clean.

3.Charge battery.

4.Remove dust canister and check inside hose for any obstruction(s).

1.Charge battery.

2.Call VAX CARE on 0870 6061248.

3.Remove and replace solution tank.

4.Refill solution tank.

1.Empty dust canister.

2.Clean or replace filter.

NOTE: You must never use ordinary batteries for replacement, as these may leak and cause damage.

This product contains Nickel-Cadmium battery and must be disposed of properly. For disposal information, call the VAX care helpline on 0870 6061248