Advanced Programming and Troubleshooting

Certain features remain hidden and can only be accessed using special key presses. Read this section if you want to:

Clear user ID preferences

Change a user ID to a name

Change the display to U.S. Standard or Metric

Enable or disable password protection

View the odometer

Display the number of hours you have used your treadmill

View the software versions and part numbers

Check the error log

Display the serial number

Advanced Programming Tips

Always start at the Precor banner.

The advanced programming and diagnostic mode is accessed by pressing the red STOP button at the Precor banner. Any remaining key presses must occur quickly and without pause.

Use the ENTER and arrow keys while in the programming mode.

If you press STOP instead of ENTER, when changing a user ID to a name, selecting the U.S. or Metric display, or changing password protection, the original setting is left intact.

The function of the QUICKSTART key is disabled while in programming mode.

Owner’s Manual: Advanced Programming and Troubleshooting

50

Page 52
Image 52
Precor M9.35I manual Advanced Programming and Troubleshooting, Advanced Programming Tips