Precor M9.35I manual Owner’s Manual Display Console

Display Console

Center display: Initially shows the Precor banner. It changes to the program profile. A blinking column in the profile indicates your position. The height of the column indicates the incline level.

SmartRate display: LEDs light in this column when the SmartRate feature is activated. Follow the LEDs to monitor your heart rate and maintain it in your target zone.

Lower display: Four sets of numbers show information about your session. Use the SELECT keys to choose what information to display.

LEDs: Light and clarify what workout statistics appear on the display.

Keypad: Use the keypad to:

• Select a program

• Answer prompts prior to starting a program

• Adjust the incline or speed

For more information, refer to Keypad.

QUICKSTART: Press QUICKSTART to begin your workout immediately. It lets you bypass the setup prompts.

Red STOP button: Press to pause a workout or return to the banner.

Heart Rate display: If a heart rate is detected, this area displays your heart rate.

SELECT keys: Each key lets you move through the information in each column, choosing what you want to display during your session.

User 1—6:Press a user ID (1—6) at

the Precor banner to personalize your workout session. Key workout

information is stored between sessions.

Number keys: During a workout, use the number keys to quickly change the speed or incline, then press the corresponding INCLINE or SPEED keys to initiate the change. When you begin a program, you can use these keys to specify new information.

Owner’s Manual: Display Console 17