Precor M9.35I manual Informational Displays, Viewing the Odometer

Informational Displays

The treadmill provides information about its use (odometer and hour meter), as well as software version, error codes, and serial number. In general, you would only access this information if directed to do so by Precor Customer Support.

These instructions guide you through all five informational displays. Pressing the ENTER key moves you through the displays. To exit, press and hold STOP at any time.

Important: Quick access to the informational displays is available if error messages have appeared on the display and have been recorded in the error log. This feature is usually reserved for service personnel. At the Precor banner, press and hold STOP for 4 seconds. Review the information in Viewing the Odometer and continue with step 2.

Viewing the Odometer

1.At the Precor banner, press the following keys in sequence and without pause:

Treadmill	Key Sequence
M9.35i	STOP, 6, 5
M9.33i	STOP, SPEED ▲, SPEED ▼

Numbers 6, 5 appear on the display as you press the associated key.

Then ODOMETER appears on the display followed by the odometer value (cumulative miles users have traveled).

Note: If the unit of measure is set to metric, then KILOMETERS appears instead of MILES.

2.When you are ready, press ENTER to move to the next display (hour meter).

Owner’s Manual: Advanced Programming and Troubleshooting 54