VBrick Systems VB Directory System manual Your Network, System Requirements, Installation

V B D I R E C T O R Y U S E R S G U I D E V E R S I O N 4 . 1

CHAPTER two

2: Installation

Your Network

The PC running VBDirectory needs to be connected to the network, and there needs to be at least one VBrick configured to send Management SAPs (please refer to the VBrick Admin Guide). It operates on any PC that has access to the network.

System Requirements

VBrick Systems recommends the following minimum system specifications:

•2000, XP, or Vista.

•Any Pentium processor.

•128 Mb RAM.

•Minimal space required (under 400k).

Installation

VBDirectory is installed in either of the following two ways:

•Run SetupVBDirectory4_1_0.exe and follow the on-screen directions. The Setup program installs the program on your computer. It is recommended that the default settings be used. The setup installs the software in the default location in Program Files>VBrick>VBDirectory . Use the default folder or specify the location.

•VBDirectory is installed along with the installation or upgrade of VB1000-2000-3000 MPEG-1 and VB400-5000-6000 MPEG-2 and MPEG-4 VBrick appliances when using Intelligent Download, the VBrick installation and upgrade program.

IMPORTANT: VBDirectory must be closed during installation or upgrade to avoid an error being reported. If the application is open, just close the file and complete the installation.

C O P Y R I G H T V B R I C K S Y S T E M S P A G E 5 J U N E 2 0 0 7