Vector BD022806 Important Safety Instructions, Introduction, Operating and Visible Features

Models: BD022806

1 4
Download 4 pages 7.78 Kb
Page 2
Image 2

IMPORTANT SAFETY INSTRUCTIONS

1.Always use the inverter where there is adequate ventilation. Do not block ventilation slots.

2.DO NOT use the inverter near flammable materials or in locations that may accumulate flammable fumes or gases.

3.ALWAYS turn OFF the inverter by removing it from the DC accessory outlet when not in use.

4.NEVER IMMERSE THE UNIT IN WATER (fresh or salt).

5.DO NOT expose to extreme heat or flames.

6.Make sure nominal powering voltage is 12 volts DC, center connection positive (+), 10 amps minimum.

7.DO NOT replace fuse with higher amperage rating.

WARNINGS

To reduce the risk of fire, electric shock, explosion or injury:

This is not a toy — keep away from children.

This equipment employs components that tend to produce arcs or sparks. DO NOT install in compartments containing batteries or flammable materials.

Use this unit in properly ventilated areas ONLY.

Do not open — there are no user-serviceable parts inside.

Do not insert foreign objects into the outlet.

Do not expose the unit to flammables, water, rain or snow.

This inverter has not been tested for use with medical devices.

INTRODUCTION

Thank you for choosing the VEC1040AMG 100 Watt Power Inverter Vehicle Power System. Please read this guide carefully before use to ensure best performance and avoid damage to the unit or items that you are using it with. Read, understand and comply with all Warnings and Safety Information to ensure safety of persons and equipment.

This inverter is a convenient, easy-to-carry, completely portable source of 115 volt AC to operate appliances to 100 watts. It can be powered by any 12 volt DC accessory outlet that can supply at least 10 amperes. It is also ideal for use with 12 volt DC cordless/portable rechargeable DC power supplies and jump-starter products.

The inverter can be used to operate: 110/120 volt AC laptop computers, game consoles, reading lamps, small fans, and more.

Recharge: 110/120 volt AC devices (laptop computers, cellular phones, camcorders, power tool battery packs) that have an appropriate recharging adapter with a three-prong 110/120 volt AC North American standard-type plug.

OPERATING AND VISIBLE FEATURES

• 100 watts continuous output – 115 volt AC, 60 Hz

• Easiest inverter to use – truly plug and play

• Adapts to any size 12 volt DC accessory outlet

• Compact, pocket size, efficient, and quiet

• Electronic circuit protection prevents damage due to overload/insufficient ventilation

Low-battery shutdown automatically occurs when battery discharges to 10.6 volts, preventing battery damage

• Self recovery from shutdown – if manual reset is required, remove and reinsert the inverter into the accessory outlet

1 2

5

3

4

6

7

1.12 volt POSITIVE (+) contact

2.Internal fuse

3.12 volt NEGATIVE (–) spring contact

4.Power plug adjusts 45°

5.Green operating LED

6.115 volt AC three-prong outlet

7.Ventilation slots

POWER SOURCE REQUIREMENTS/RUNTIMES

The inverter can be powered by any 12 volt DC accessory outlet that can supply at least 10 amperes. A charged car battery with 50 amp hours of capacity can operate this inverter at 100 watt output for approximately five hours.

2

3

Page 2
Image 2
Vector BD022806 user manual Important Safety Instructions, Introduction, Operating and Visible Features