Vector VEC018-AC owner manual Storage, Introduction

Storage

•Ideal storage temperature range is 50-68°F (10-20°C).

•Store the Pocket Generator™ in a cool, dry place with adequate ventilation for all-around air circulation.

•Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness.

•To maximize useful life, fully charge the unit before storing.

•If storing at less than 50°F, recharge every six months; at 50-80°F, recharge every three months; at 80-104°F, recharge every 45 days.

•Always make sure the unit is disconnected from charger before storing.

SPECIFICATIONS: Pocket Generator™

AC Output	110-volts
DC Output	12-volts
Fuse	10 amps
Battery	12-volt 5 amp hour sealed lead acid, maintenance-free
Inverter	50-watts continuous/80 amps peak surge capacity
Weight:	4.60lbs.
Height:	6.25”
Depth:	4.00”
Width:	7.50”

Power Force 50™ Inverter

WARNING: Do not attempt to remove the inverter from the unit for any reason - it is hard-wired into the unit, and you may cause unnecessary damage to the unit and void the manufacturer’s warranty. In the event of any failure, refer to the warranty information at the back of this manual and return the complete unit for repair or replacement, or call the customer service department at Vector Manufacturing, Ltd. (954) 923-1155.

The Vector™ Power Force 50™ inverter supplied with the Pocket Generator™ is one in a series of the most advanced DC to AC inverters available today. With proper care and maintenance, it will deliver years of dependable service. For easy reference, see sections titled:

Introduction

How the Power Force 50™ Inverter Works

Power Source Requirements

Fuse Replacement

Operating Tips

Troubleshooting

Specifications

7