Vector VEC049C owner manual A. Power Output

APPLIANCE	AMPS@	WATTS@
	110/120VAC	110/120VAC
COMPUTER AND MONITOR	4	440
PORTABLE VACUUM	4.6	506
8-CUP COFFEE MAKER	5.5	605
ELECTRIC TRIMMER	5.5	605
1/2" HAMMER-DRILL	5.5	605
RECIPROCATING SAW	6	660
VACUUM CLEANER	7.2	792
1-1/8" ROTARY HAMMER	7.8	858
1/6 H.P. SUBMERSIBLE SUMP PUMP	8	880
COMPACT MICROWAVE OVEN	8.5	935
10" BENCH SAW	13.0	1500

NOTE: APPLIANCE SPECIFICATIONS MAY VARY FROM BRAND TO BRAND. THIS TABLE IS OFFERED ONLY AS A GUIDE TO APPROXIMATE POWER RATINGS. CHECK APPLIANCE MANUALS OR PRODUCT LABELING FOR ACTUAL RATINGS. TO USE THE MAXIMUM OUTPUT OF CONTINUOUS WATTS, MAXX SST MUST BE CONNECTED TO A DC POWER SUPPLY CAPABLE OF PROVIDING 1/10TH OF INVERTER’S CONTINUOUS WATTAGE RATING.

A. Power Output

The inverter will operate most AC loads within its power rating. Some induction motors used in refrigerators, freezers, pumps and other motor-operated equip- ment, require very high surge currents to start them. The inverter may not be able to start some of these motors even though their rated current draw is with- in specifications for this power inverter.

If a motor refuses to start, observe the battery voltage using a DC voltmeter while trying to start the motor. If the battery voltmeter drops below 11 volts while the inverter is attempting to start the motor, this may be why the motor won’t start. Make sure that the battery connections are tight and that the battery (or batteries) is (are) fully-charged. If the connections are good and the battery is charged, but the voltage still drops below 11 volts, you may need to use a larger battery (or battery combination).

B. Input Voltage

The inverter will operate from input voltages between 10.5 and 15.5VDC. If the voltage drops below 10.6 volts, an audible low battery warning alarm will sound. The inverter will shut down if the input voltage drops below 10.5VDC. This built- in feature protects the battery from being completely discharged.

The inverter will also shut down if the input voltage exceeds 15.5 volts. This protects the inverter against excessive input voltage. Although the inverter has built-in protection against over voltage, it may still be damaged if the input voltage exceeds 15.5 volts.

NOTE: Exceeding recommended voltage limits will void manufacturer’s warranty.

10