IMPORTANT SAFETY INFORMATION

To ensure reliable service, your power inverter must be installed and used properly. Please read the installation and operating instructions thoroughly prior to installation and use. Pay particular attention to the WARNING and CAUTION statements in this manual. The CAUTION statements advise against certain conditions and practices that may result in damage to your inverter. The WARNING statements identify conditions or practices that may result in personal injury.

READ ALL INSTRUCTIONS BEFORE USING THIS POWER INVERTER

WARNINGS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY:

Do not connect to AC distribution wiring

Remove appliance plug from outlet strip or turn off inverter before working on the appliance

DO NOT place inverters in an area, room or compartment where explosive or flammable fumes might be present

Using power strips, with switches and circuit breakers, only interrupt power to the “hot” receptacle terminals. The “neutral” terminals remain powered with respect to the “ground” terminals

Always unplug appliances when servicing

This is not a toy - keep away from children

CAUTIONS

NO USER-SERVICEABLE COMPONENTS INSIDE;

OPENING UNIT WILL VOID WARRANTY; TO SERVICE INVERTERS CONTACT SERVICE DEPARTMENT AT (866) 584-5504

Do not install in engine compartment - install in a well ventilated area

Do not use with positive ground electrical systems (the majority of modern automobiles, RVs, trucks and boats are negative ground)

Reverse polarity connection will result in a blown fuse, may cause permanent damage to the inverter and will void the warranty

This inverter will not operate appliances or equipment that exceed inverters maximum rating

Grounding the Neutral will cause the inverter to shut down

Do not operate this inverter if it is wet

Not approved for use with medical equipment

IMPORTANT CABLE INFORMATION

Substantial power loss and reduced battery operating time results when inverters are installed with cables that are not able to supply full power. Low battery power can result from cables that are either excessively long or an insufficient gauge. The installer/operator should be aware of all installation requirements to maintain secure, electrical connections. Cable insulation and ampacity must be the appropriate type for the environment. To purchase a prepared cable and fuse set, contact Technical Support at (954) 584-4446 or toll-free (866) 584-5504.

Page 2
Image 2
Vector VEC049C owner manual Important Safety Information, Read ALL Instructions Before Using this Power Inverter

VEC049C specifications

The Vector VEC049C is a sophisticated and portable power inverter designed for rugged automotive and emergency applications. This inverter converts 12V DC battery power into a stable 120V AC power source, making it ideal for powering a variety of electronic devices while on the go. It serves as an essential tool for outdoor enthusiasts, travelers, and those in need of backup power solutions during emergencies.

One of the main features of the VEC049C is its robust construction, which ensures durability in challenging environments. This inverter is equipped with multiple output options, including standard AC outlets as well as USB ports, catering to a wide array of devices such as laptops, smartphones, and small appliances. Its capacity to deliver up to 400 watts of continuous power makes it suitable for charging devices or running equipment like lights and fans.

The Vector VEC049C incorporates advanced technology to enhance both performance and safety. The unit features built-in protection mechanisms against overload, short-circuit, and over-temperature, providing peace of mind during operation. Furthermore, the inverter employs a modified sine wave output, which is often sufficient for less sensitive electronics and ensures efficient energy conversion.

The design of the VEC049C is both compact and lightweight, allowing for easy transport and storage. Users can conveniently stow it in their vehicle or carry it in a backpack, making it a practical option for road trips, camping adventures, and outdoor activities. The unit can easily be plugged into a car’s 12V outlet, allowing for easy access to power whenever it's needed.

In terms of user-friendliness, the Vector VEC049C features an LED status indicator that provides real-time information about the power condition and operation status. This usability aspect is crucial for individuals who may not have technical backgrounds but require reliable power solutions.

Overall, the Vector VEC049C stands out for its combination of portability, safety features, and versatility. With its capacity to bridge the gap between 12V DC and 120V AC power needs, this inverter is an invaluable asset for anyone seeking reliable energy solutions in a mobile format. Whether on a road trip, at a campsite, or during a power outage, the VEC049C ensures that essential devices remain operational and accessible.