VEC401_Manual_030705 3/9/05 2:45 PM Page 4

INSTRUCTIONS

Powering the Mobile Gaming System Using the DC Power Cord

Open the 12 volt DC Power Cord Storage Compartment on the bottom of the unit.

ATTACHED 12

VOLT DC POWER

CORD STORAGE

COMPARTMENT

Connect the attached 12 volt DC Power Cord to the 12 volt DC Accessory Plug. Plug the Accessory Plug into a vehicle’s accessory power outlet (or other 12 volt DC power source that can supply at least 10 amperes).

Note: This may require the vehicle’s ignition switch to be turned on.

DC POWER CORD TO

DC ACCESSORY PLUG CONNECTION

ATTACHED 12 VOLT DC

POWER CORD

12 VOLT DC

ACCESSORY PLUG

CAUTION

If amber LED lights, the vehicle’s voltage is too low. Stop use and charge the vehicle’s battery before continuing.

Powering the Mobile Gaming System

Using the Household Use AC/DC Adapter

Plug the barrel connector of the Household Use AC/DC Adapter into the jack labeled DC IN 12V on the right side of the Game Power Mobile Gaming System. Connect the Household Use AC/DC Adapter’s plug into a 120 volt AC household outlet.

HOUEHOLD USE

AC/DC

ADAPTER

12 VOLT DC IN

Note: The AC/DC Adapter cannot power the built-in power inverter.

4

Setting Up the Game Power Mobile Gaming System

1.Follow the instructions for powering up the Mobile Gaming System on the previous page.

2.Open up the Mobile Gaming System by sliding the Fold-Down Release Latch.

FOLD-DOWN

RELEASE LATCH

3.Plug your game system, DVD player or other unit’s power cord into the 120 volt AC outlet on the left side of the Game Power Mobile Gaming System (see below).

Note: If using the included Household Use AC/DC Adapter to power the Mobile Gaming System at home, plug the video game or DVD player power cord directly into a 120 volt AC household outlet.

4.Plug the video game or DVD’s “Video Out” plug into the Mobile Gaming System’s (yellow) Video In jack.

3.Plug the video game or DVD’s “Left Audio” plug into the (white) AUDIO L jack.

4.Plug the video game or DVD’s “Right Audio” into the (red) AUDIO R jack.

5.If desired, plug headphones (not included) into the headphone jack.

Note: Headphones are not required.

VIDEO IN

RIGHT

 

 

AUDIO

 

LEFT

 

HEADPHONE 120 VOLT AC OUTLET

AUDIO

JACK

6.Press the power switch on the screen and the green LED will light. The power switch controls power to the screen only.

LEDS

POWER

 

SWITCH

5

Page 5
Image 5
Vector VEC401 owner manual Instructions, Powering the Mobile Gaming System Using the DC Power Cord