(1)POWER – Press the POWER switch to the ON position to activate the subwoofer. If the unit is to be left unused for an extended period of time, move this switch to the OFF position to prolong the life of the subwoofer.

(2)117V~60Hz 15A – Connect your detachable AC power plug to this male interface connection. The detachable cord allows for easy replacement should the original be damaged.

(3)RS-232 IN – Use this port to communicate with your computer (for software updates), a touch panel remote control, or another upstream Digital Drive subwoofer. See Appendix A for an explanation of the use of the serial port, available commands, and their formats.

(4)RS-232 OUT – Use this port to communicate with a second “daisy-chained” Digital Drive subwoofer. Also, the 12V trigger feature requires a 12V trigger signal (polarity irrelevant) across pins 7 and 9 of this port.

(5)S-Video – This connects to your S-Video compatible TV. NOTE: Only connect to a single video output at a time.

(6)LFE INPUT – This XLR input jack receives the balanced LFE signal from your receiver or processor.

(7)MIC INPUT – This XLR input jack is for your XLR microphone cable.

(8)EQ OUTPUT VIDEO/LEFT/RIGHT – Connect the audio/video cable from your accessory kit to these jacks: yellow plug to VIDEO (connects to an available video input on your processor or TV), white plug to LEFT, and red plug to RIGHT (these connect to an available L/R input on your receiver or processor, such as AUX). NOTE: Only connect to a single video output (i.e. composite or S-Video) at a time.

(9)THRU – These RCA connectors are for sharing the same signal that goes into your subwoofer with a second “daisy-chained” subwoofer. RCA input comes out of the THRU jack.

(10)OUTPUT – These RCA connectors incorporate the use of an 80Hz 6 dB/octave slope high pass crossover.

(11)INPUT LFE – This RCA input jack is for line-level connection.

(12)REMOTE SENSOR - This connection allows for hook-up of the optional remote control receiver. With this optional receiver plugged in you will be able to utilize the functions of the remote to control power, volume and mute functions. Place the infrared receiver within direct line of sight from your usual listening position.

(13)VOLUME UP/DOWN – Press the black UP pushbutton to incrementally raise your subwoofer’s system volume; press the black DOWN pushbutton to incrementally lower your subwoofer’s system volume. Note the use of these buttons during software updates.

(14)SPEAKER LEVEL INPUT RIGHT/LEFT – This speaker-level connector allows either banana plug/jack or exposed wire/terminal connections.

Installation – Step-by-Step

To ensure a quick and flawless installation of your Velodyne Digital Drive unit, follow these numbered setup instructions in their exact order.

Subwoofer Cable Connections

Make all necessary cable connections between the applicable subwoofer connector port and your particular home electronics equipment in the following order:

1.Insert the detachable AC power cord into the 117V~, 60Hz, 15A power interface port on the rear panel of your subwoofer. Plug the male end of the cord into a convenient wall outlet.

Velodyne Digital Drive User’s Manual

Page 5

Page 10
Image 10
Velodyne Acoustics Digital Drive Subwoofer user manual Installation Step-by-Step, Subwoofer Cable Connections

Digital Drive Subwoofer specifications

The Velodyne Acoustics Digital Drive Subwoofer represents a significant advancement in home audio technology, designed for audiophiles who desire deep, powerful bass without compromising sound quality. This subwoofer integrates cutting-edge features and innovative technologies to deliver an unparalleled audio experience.

One of the most notable features of the Digital Drive Subwoofer is its patented Digital Drive technology. This system utilizes advanced digital signal processing to produce precise bass response, eliminating distortion and enhancing clarity. The result is a dynamic sound that can fill any room, making it ideal for both music and home theater applications.

The subwoofer is equipped with a high-efficiency Class D amplifier that boasts impressive power output. This amplifier not only drives the subwoofer's cone effectively but also allows for significant headroom, ensuring that even the most demanding audio tracks are played back effortlessly. The combination of the amplifier with Velodyne’s custom-designed drivers means that users can expect deep, responsive bass that resonates throughout their listening space.

Smart EQ technology is another stand-out characteristic of the Digital Drive Subwoofer. This feature allows for automatic room correction, analyzing the acoustics of your space and adjusting the subwoofer’s performance accordingly. This ensures optimal sound quality tailored to your specific environment, eliminating issues caused by room acoustics that can degrade audio performance.

The subwoofer also features a sleek, modern design, making it an attractive addition to any home audio setup. Its compact form factor allows it to fit seamlessly into various living spaces, while still delivering rich, impactful sound. The Digital Drive Subwoofer provides multiple connection options, including both line-level and speaker-level inputs, enabling versatile integration with different audio systems.

Additionally, this model includes an intuitive remote control for easy operation. Users can conveniently adjust volume levels, phase settings, and EQ options, allowing for a customized listening experience. With its combination of powerful performance, innovative technology, and user-friendly features, the Velodyne Acoustics Digital Drive Subwoofer is a top choice for anyone looking to enhance their audio experience with rich, immersive bass.