Prepare for Installation

Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best for your system. Remember to perform all installation procedures with system power turned off to prevent possible damage.

Placement

The first step in installing your new VMS is to determine where it will be placed in the room. Unpack the system carefully and use the following guidelines in order to find the best room placement option.

True subwoofers operate at extremely low frequencies which are primarily omni-directional. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. To obtain optimum output from your subwoofer, place it within a foot of a corner. This location will offer the greatest output levels and optimum low frequency extension. If at all possible, your subwoofer should be placed along a wall. The worst location for a subwoofer is typically far away from any walls and close to the center of your room. Avoid these locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to place each subwoofer near the satellite of the same channel.

Depending on the size and type of furnishings in the room, perfect placement may not be possible. Finding the best location within your environment will likely require some experimentation. We suggest you experiment with the location during setup to find what sounds best to you when seated in your typical listening position.

Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping or storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.

Caution!

This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched or compressed in any way that could result in damaging the insulation or wire.

.w w w . v e l o d y n e . c o m

VMS User’s Manual

2

Page 4 Page 6
Page 5
Image 5
Velodyne Acoustics VMS-8 user manual Prepare for Installation, Placement
Page 4 Page 6

VMS-8 specifications

The Velodyne Acoustics VMS-8 is a prominent model in the realm of professional audio systems, designed specifically for high-quality sound reproduction in various settings, including home theaters, commercial spaces, and professional venues. This versatile speaker system combines advanced technology with a commitment to delivering crystal-clear audio, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the VMS-8 is its innovative driver design. It is equipped with an 8-inch high-efficiency woofer that provides powerful, deep bass response while maintaining clarity across a broad frequency range. The woofer is complemented by a precision-engineered tweeter that delivers crisp and clear high frequencies, resulting in a well-balanced sound profile. This two-way configuration ensures that the speaker can handle everything from the subtle nuances of classical music to the thunderous explosions of action films.

The VMS-8 utilizes Velodyne’s patented Digital Signal Processing (DSP) technology, which optimizes audio performance by intelligently adjusting the sound output according to the acoustics of the room. This feature ensures that users experience consistent audio quality, regardless of the environment. Additionally, the DSP allows for multiple equalization presets, enabling users to tailor the sound characteristics to their preferences or specific listening situations.

Another key characteristic of the VMS-8 is its robust construction. The speaker is housed in a solid enclosure designed to minimize resonance and standing waves, providing pure and uncolored sound reproduction. The front baffle is built from high-density MDF, which helps in preventing vibrations that could distort the audio signal. Furthermore, the cabinet features a sleek and modern design, making it an aesthetically pleasing addition to any setup.

Connectivity options for the VMS-8 are extensive, supporting both wired and wireless connections. It features multiple input options, including XLR, TRS, and RCA, making it compatible with a wide range of audio sources, from mixers to digital audio workstations. The unit also includes Bluetooth functionality, allowing for effortless streaming from mobile devices, an essential feature for modern listening habits.

In conclusion, the Velodyne Acoustics VMS-8 stands out for its combination of advanced driver technology, DSP capabilities, robust design, and versatile connectivity. Whether used in a home theater, studio, or commercial application, the VMS-8's comprehensive feature set ensures an immersive audio experience that meets the demands of discerning listeners.
Top Page Image Contents