Venture Products S-16, 7000 series, 4000 series manual Attachments

Weight 163 lbs. 203 lbs. 225 lbs.

M I N U T E M O U N T / 3 - N - 1

Attachments

BLADES	BROOM HB580		EXCAVATORS
The Dozer Blade is hydraulically angled left and right.	The HB580 Broom for the 4000 and 7000 series		HJ Excavator buckets allow the
Adjustable skid shoes, removable locking pin, and	tractors is hydraulically driven and can be		operator to excavate, dig, and
reversible cutting edge are standard.	angled right or left using the		haul material. Its innovative flip-
Optional: Polyurethane cutting edge and hard-	auxiliary S.D.L.A. lever.		back design allows for forward
			or reverse excavating.
ened cutting edge.	Optional: 12V Actuator allows
	the operator to slow or reverse
	the rotation	of the
	bristles from	the
	operator seat.

All Ventrac attachments mount in about a minute or less.

1 2 3 4

Ventrac’s Minute Mount System is the ultimate example of practical engineering put to good use. Simply drive up to the Ventrac attachment of choice:

1.Lock onto the holding pins

2.Insert the coupler connections* and/or...

3.Install the drive belt*

4.Engage the belt tensioner*

And you’re ready to go! *As required by attachment

AERATOR EB480

The Ventrac Aerator offers the exact tools to address your turf grass conditions. Choose between core or open spoon tines. The tines are replaced either individually or by quickly changing the entire

mounting heads.

	KD480	KD600	KD720
Width	48”	60”	72”
Height	22”	22”	22”
Angle (right or left)	30º	30º	30º
Weight	163 lbs.	203 lbs.	225 lbs.

3000 4000 7000 series

BLOWER KA160

The KA160 Power Blower for the 4000 and 7000 series tractors rotates 180º horizontally left and right with a standard hydraulic motor controlled

from the operator seat.

Overall width			68”
Overall height			24”
Overall length			54.5”
Broom width			58”
Broom speed			220 rpm*
Weight			382 lbs.
Gauge Wheels			Standard
			*Engine speed 3200 rpm
4000	7000	series

BROOM LB540

The LB540 Broom for the 3000 series tractor is hydrau- lically angled left or right using the Auxiliary lever.

Optional: Belting curtain and outrigger wheels (inset) for de-thatching your yard.

	HJ300	HJ480
Overall width	36”	53.5”
Working width	30”	48”
Height	13”	13”
Length	34”	34”
Capacity	3.6 ft3	5 ft3
Ground clearance	11”	11”
Weight	145 lbs.	189 lbs.

3000 4000 7000 series

FIELD MOWER LQ450

The LQ450 Field Mower is designed to cut heavy grass and small brush growth with three different height settings. Two counter-rotating blades discharge grass to the center rear.

Optional: Tree Shield Kit with branch lifters and wheel cov- ers for tree farms (rear weights

Rear Attachments

Attachments with this symbol can also be mounted to the rear using Ventrac’s optional 3-point hitch and 3-N-1 adapter.

Ventrac 4000 series tractors can be equipped with a Category One 3-point hitch. With the 3-N-1 adapter mounted to the optional Category One 3-point hitch, non-powered attachments can be operated from behind the tractor alone or simultaneously with the front. Versatility by Design just got better!

Overall

width

54”

Overall height				27”
Overall length				27”
Working width				48”
Aeration	density			6 holes/f2
		7000	series
3000	4000
Weight				217 lbs.

AERA-VATOR EA600

The AERA-vator is designed to fracture the soil beneath the sod without destroying the turf on the surface. This means that turf is ready for use immediately after treatment. Penetrating the soil with no slicing or cutting action, preserves the delicate turf grass roots and stimulates

future growth.

Optional: Seed-box (shown) allows for over-seeding and aerating simultaneously.

Overall width	66”
Overall height	22”
Overall length	34”
Working width	60”
Tines	96 (0.5625 x 3.5”)
Weight	350 lbs.
Side-to-side tine travel	1.25”
Vibrating depth	3.75”
Tine vibration frequency	3200 rpm
	=est. 800 cyc/min
Aeration density	8 holes/f2

Overall width	32.5”
Overall height	22”
Overall length	36”
Fan	16 blade
Wind speed	180 mph
Volume	4000 cfm
Weight	163 lbs.
Hydraulic motor	Standard

4000 7000 series

BLOWER LA162

The LA162 Blower for the 3000 series tractor can be angled 180º horizontally left and right with the

standard hydraulic motor.

Overall width	32.5”
Overall height	22”
Overall length	42”
Fan	16 blade
Wind speed	160 mph
Volume	3400 cfm
Weight	145 lbs.
Hydraulic motor	Standard

Broom width	54”
Overall width	60.5”
Overall height	18.5”
Overall length	46.5”
Broom diameter	16”
Broom speed	300 rpm*
Weight	240 lbs.
Gauge wheels	Standard

		*Engine speed 3200 rpm
3000	series

EDGER ED200

The Edger is designed to edge sidewalks, curbs, cart paths, etc. The edging disc can be reversed for shaping garden and flower beds.

Optional: Weights and blower* for removing edged debris.

*Blower attaches only to 4000 and 7000 series
	Overall width	54-66”
	Overall height	27”
	Overall length	45”
	Weight	182 lbs.
	Weight w/blower	222 lbs.
	Disc diameter	20”
	Cutting depth	6”

recommended).

Cutting width	44.5”
Cutting height	2.25” / 3.5” / 4.75”
Height	16”
Length	55”
Weight	243 lbs.

3000 series

GENERATOR HG150

The Ventrac Generator is great for mobile power or as a standby unit.

Receptacles	include: (4)
120v, 20A	receptacles;
(1) 120v, 30A Twistlock,
(1) 240v, 30A Twistlock,
(1) 240v, 50A Range re-
ceptacle.
Maximum watts	15,000
Continuous watts	12,500
Voltage	120/240
Amperage	79.2/39.6
Hertz	60
Phase	1
Req. constant shaft speed	3,000 rpm
Net weight	196 lbs.

		series		series							series
4000	7000
			3000		3000	4000	7000	series	4000	7000