Venture Products 7000 series, S-16, 4000 series manual Slip Scoops, Loader Attachments

HM & HP SERIES FINISH MOWERS

All Ventrac finish mowers (HM, HP, LM) feature single lever height adjustment, easy flip-up deck design, and rear roller for maximum lawn striping. The HP offset mower shifts the mowing deck 6.5” to the left for a shorter cutting radius and increased reach for mowing around ponds or ditches.

SLIP SCOOPS

Ventrac Slip Scoops are a must-have attachment allowing you to dig, level,

and move a variety of materials.

SOD CUTTER EC240

The Sod Cutter cuts a 24” wide strip of sod at a user- adjustable depth.

TERRA RAKES

The Terra Rake is designed to perform a variety of landscaping jobs. Features include: Hydraulic angling and gauge wheels that can be mounted front, rear or removed.

Optional: Hydraulic height adjustment link (shown), 10” wing extensions.

TRENCHER KY400			VERSA-LOADER KH500
The Ventrac Trencher is capable of trenching up to 40			Discover the versatility and ease of the Ventrac
inches deep with a 5.5 inch-wide cut. Depth indicator			Versa-Loader (shown with standard bucket). Drive up
allows operator to gauge depth of cut from the operator			and attach in minutes
seat. Standard features include: Self-adjusting crumb			without	tools or
scraper	and	combo	heavy lifting. Once
terminator/cup chain with			connected,choose
replaceable carbide teeth.			the	standard
			bucket or six other optional
			attachments which also feature
			Ventrac’s Minute Mount system

	HE300	HE480
Overall width	36”	52.5”

to get the job done.

4000 SERIES	HM602	HM722	HP722
Width of cut	60”	72”	72”
Cutting height	1.125 - 4.75” 1.125 - 4.75”		1.125 - 4.75”
Length	52”	58”	58”
Weight	385 lbs.	450 lbs.	450 lbs.

4000 7000 series

LM SERIES FINISH MOWERS

Working width	30”	48”
Height	15”	16”
Length	34”	34”
Weight	111 lbs.	175 lbs.
Capacity	3.6 f3	6 f3

3000 4000 7000 series

SNOW BLOWER KX522

With a serrated auger, the KX and LX snow blowers cut into light or hard-packed snow with ease. Chute is rotated hydraulically left or right 220º on the KX and 180º on the LX.

Optional: A 12V actuator allows the operator to change the height of throw from the operator seat. A deep snow

auger is also optional on the KX522.

Cutting width	24”
Height	11.5”
Length	23.5”
Cutting Depth	0 to 2.5”
Weight	41 lbs.

4000 series

STUMP GRINDER KC180

The KC180 Stump Grinder features 18 replaceable carbide cutting teeth for large or small stump removal. Standard front mounted mirror allows the operator to see the stump easily while being fully protected from debris.

	KR502	KR702
Overall width	52”	70”
Overall width w/extensions	72”	90”
Height	29.5”	29.5”
Length	52”	52”
Weight	242 lbs.	325 lbs.

3000 4000 7000 series

TILLER KL480

The Ventrac Tiller is designed for easy preparation of gardens and yards. This power-driven front-end attachment allows the operator to easily monitor the tiller’s performance. Skid shoe adjustments facilitate cutting depth. Twenty-four high carbon

tines are durable and are sequentially spaced to maximize performance.

Overall height	27”
Overall width	40”
Overall length	74.5”
Trenching width	5.5”
Trenching depth	40”
Weight	493 lbs.

4000 7000 series

TURBINE BLOWER ET200

The Ventrac Turbine Blower’s front nozzle hydraulically rotates 360º continuously on a vertical plane. The front guard protects the nozzle while doubling as a deflector

for blowing forward.

Overall height on tractor	67”
Overall width	41.5”
Overall length w/standard bucket	75”
Overall length - tractor, loader & std. bucket	111”
Width of standard bucket	48”
Capacity of standard bucket (struck)	5 f3
Weight w/o tools	508 lbs.
Lift capacity including tool	500 lbs.
Lift height (at pivot points)	77”
Oil tank capacity	6 gal.
Gallon/min. @ 3600 rpm	9.5 gpm

4000 series (Loader is not compatible with the Cab)

LOADER ATTACHMENTS

Easy height adjustment.

Length 69”

3000 SERIES	LM440	LM520	LM600
Width of cut	44”	52”	60”
Cutting height	1.5 - 3.75” 1.5 - 3.75”		1.5 - 3.75”
Length	45”	45”	58”
Weight	220 lbs.	273 lbs.	310 lbs.

3000 series

POWER RAKE KP540

The Power Rake pulverizes, levels, grades and prepares seed beds with 72 replaceable carbide tips. The rotor is both driven and angled hydraulically. Rotation can be changed from the

operator seat.

Width	52”
Height	56.5”
Depth	43.75”
Cutting height	26.5”
Cutting width	48”
Blowing distance	Up to 40’
Chute rotation	220º
Weight	475 lbs.

4000 7000 series

SNOW BLOWER LX420

Standard mirror on KC180
Overall height	19”
Overall width	25”
Overall length	35”
Cutterhead width	3.5”
Overall cutterhead diameter	18”
Cutterhead speed	900 rpm*
Cutting depth below ground level	6”
Weight	171 lbs.

			*Engine speed 3600 rpm
4000	7000	series

STUMP GRINDER LC150

The LC150 Stump Grinder features 12 replaceable carbide cutting teeth. An

adjustable blade hydraulically lowers for use as a depth, jackstand and to fill in stump holes.

Overall width	53”
Working width	48”
Length	41”
Height	22”
Weight	345 lbs.

4000 series

TOUGH CUT MOWER HQ680

The Ventrac Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. Three heavy- duty blades counter-rotate to cut and drop materials evenly without windrowing. Tilt-up deck provides easy access to the blades.

Optional: Adjustable Swivel wheels for a more controlled height of cut.

Width			27”
Height			34”
Weight			256 lbs.	MULCH BUCKET	TINE FORKS
MPH out of nozzle			175 mph*
				9 cu. ft.
MPH out front of deflector			110mph*
Volume			10,000 cfm*
			*Engine speed 3650 rpm
4000	7000	series

V-BLADE KV550

The V-Blade is ideal for sidewalk snow			POST HOLE DIGGER	TREE AUGER
removal. Both wings can be independently
	angled hydraulically forward or		Fast drive motor	Slow drive motor
	back for greater control.
	Optional: Wing extensions,
	top	deflection flap,
	and	polyurethane
	cutting edge.
			BOOM LIFT	PALLET FORKS

				Overall height	19.5”
Overall height	34”
				Overall width	21”
Overall width	62”	Width (cutting & overall)	42”	Overall length	40”
Overall length	82”	Height	52.5”
				Cutterhead width	3.5”
Rotor width	54”	Length	43”
				Rotor tip speed	2,475 ft/min.*
Height adjustment	.125” increments	Throwing distance	Up to 40’
				Rotor rpm	620 rpm*
Height adjustment range	3.5”	Chute rotation	180º	Cutting depth below ground level	6”
Weight	536 lbs.	Weight	374 lbs.	Weight	200 lbs.

Working width	68”
Cutting heights	3”, 3.625”, 4.25”
Length	45”
Height	15”
Weight	354 lbs.

Length	31”
Width straight	55”
Width in forward “V”	48.5”
Width in backward “V”	48”
Height	21”
Weight	240 lbs.
Wing angle	30º each

		series		series		series
4000	7000
			3000
					3000

*Engine speed 3200 rpm

		series				series
4000	7000
			3000	4000	7000