Installing HP FTAM/9000
Installation Overview
Installation Overview
Before installing HP FTAM/9000, you need to have installed the other parts of your “OSI stack” (OTS/9000 and the LAN/9000 link, the X.25/9000 link, and/or the FDDI/9000 link, as applicable).
Each of the products in the OSI stack requires a specific amount of root partition space. When the amounts of root partition space for the different products you have installed are added together, the total must not exceed the total space on your system. Verify that there is sufficient remaining space in the root partition of your HP 9000 computer before installing HP FTAM/9000. The root partition may need to be increased to accommodate all of the OSI stack products together. If you attempt the installation and do not have sufficient space, the update program will let you know how much space you need.
Complete the steps on the following pages to install HP FTAM/9000. The screens and messages that you see may be different from those shown, depending upon the type of computer that you are using.
Complete all installation steps before beginning the configuration steps in chapter 2.
Before You Begin the Installation
Your
Menus
You can select items within a screen menu in any of the following three ways:
•By entering the first letter of the item (if the first letter is unique). For example, if you want to select the Country parameter on a screen, you would type the letter c.
•By using the arrow keys to highlight the item and then pressing Return or SELECT ITEM f4. (This is called “selecting” the item.)
•By using Tab to scroll down or
12 | Chapter 1 |
