Configuring HP FTAM/9000
Configuration Worksheets
FTAM Remote Responder Worksheet
This worksheet is used to configure all FTAM Remote Responders. You need to make one copy of the worksheet for every FTAM Remote Responder with which you will want to communicate. If you do not have the information shown below about the FTAM Remote Responder or Responders, you need to obtain that information.
There are no default parameters for this worksheet. Write parameter values in the appropriate areas below, referring to the “FTAM Remote Responder Parameters” section for information about the parameters.
Remote responder's alias
Presentation selector (hex string)
Session selector (hex string)
Transport selector (hex string)
Network address (hex string)
20 | Chapter 2 |
