HP UX 11i v2 Networking Software manual Number of times to attempt recovery

Configuring HP FTAM/9000

FTAM Parameters: ftam_parms

ft_no_of_recovery This parameter allows you to configure the number of recoveries that will be attempted on each file transfer. This will prevent looping of the recovery procedure. The value is only used if the ft_qos error class is set to 1 or 2.

FORMAT	decimal number
UNIT	number of times to attempt recovery
RANGE	1 - 99999
DEFAULT	5
OSICONF	no
DYNAMIC	yes
SCREEN	NA
FIELD	NA

ft_recovery_timer This parameter allows you to configure the time of delay required for the local FTAM responder to recover, before the recovery procedure begins. The timer is sent back to the FTAM initiator via the F-RECOVER response. The FTAM initiator will retry with an F-RECOVER request after the timer has expired. The value is only used if the ft_qos error class is set to 1 or 2.

FORMAT decimal number

UNITseconds

RANGE 0 - 3600

58 Chapter 2