Configuring HP FTAM/9000
Configuration Worksheets
Configuration Worksheets
There are three HP FTAM/9000 configuration worksheets: the FTAM Initiator worksheet, the FTAM Responder worksheet, and the FTAM Remote Responder worksheet.
The FTAM software that was installed on the local node has default parameters for the FTAM Initiator and FTAM Responder. The FTAM program can function normally with these default parameters. If you choose to change the parameters for local node customization, or to differentiate between multiple installations of FTAM within the same subnetwork system, write the new parameters on the FTAM Initiator and FTAM Responder worksheets.
There are no default parameters for the FTAM Remote Responder.
Chapter 2 | 17 |
