Configuring HP FTAM/9000
Configuration Worksheets
FTAM Initiator Worksheet
This worksheet contains the identification information supplied to remote nodes when this node initiates an FTAM connection, as well as the number of simultaneous FTAM connections that may be open at one time (using ftam, fcp, and the like).
You do not need to fill in this worksheet if (1) peer FTAM implementations (such as HP FTAM/9000) do not check the authentication information or (2) the default FTAM Initiator parameter values are acceptable. Refer to the “FTAM Initiator Parameters” section in this chapter for the default values.
If you do not need to complete this worksheet, turn to the next worksheet, the FTAM Responder worksheet.
If you choose to change the default FTAM Initiator parameter values, write the changes in the appropriate areas below, noting the restrictions at the beginning of the “FTAM Initiator Parameters” section. Then turn to the next worksheet, the FTAM Responder worksheet.
Country
Locality
Organization
Organizational unit
Application process
Application entity
Maximum number of invocations
Maximum number of associations per invocation
18 | Chapter 2 |
