Configuring HP FTAM/9000

HP FTAM/9000 Configuration

HP FTAM/9000 Configuration

The FTAM Initiator, FTAM Responder, and FTAM Remote Responder each have one configuration screen. You will need to display the FTAM Initiator and FTAM Responder screens only if you want to change their default parameters.

To begin FTAM configuration

1.If you are in the osiadmin program, press f8 until the osiadmin Main menu is displayed.

If you exited the osiadmin program after you finished installing FTAM, you instead need to enter /usr/sbin/osiadmin at the system prompt.

2.Select FTAM.

The FTAM menu is displayed.

3.Select Configure FTAM.

When you select Configure FTAM, osiadmin invokes the osiconf program to perform the configuration. The FTAM Configuration screen is displayed.

Chapter 2

29

Page 29
Image 29
HP UX 11i v2 Networking Software manual HP FTAM/9000 Configuration, To begin Ftam configuration