Configuring HP FTAM/9000
HP FTAM/9000 Configuration
Figure4. Press the space bar to return to the FTAM Configuration screen.
To configure the FTAM Responder1.Select FTAM Responder: View/Modify.
The View/Modify FTAM Responder screen shown below is displayed. It shows the default parameter values for the FTAM Responder.
2.Change the default values shown in the screen to match the values you added to the FTAM Responder worksheet.
3.Press Perform Task [f4].
A
4.Press the space bar to return to the FTAM Configuration screen.
Chapter 2 | 31 |