Configuring HP FTAM/9000
FTAM Remote Parameters: remote_app
ae_remote_paddr This parameter is the remote Presentation Address for this application.
FORMAT | ASCII string |
UNIT | NA |
RANGE | The parameter has the form: |
|
|
| where: |
| |
| digits) |
| |
| |
| Each selector must be an even number of digits. |
| Absent selectors (0 length) are treated as nell |
| selectors. In this case, the period (.) between |
| selectors must still be included. For example 31..30 |
| indicates a null |
| NSAP # - Network Address |
| digits) 1 - 8 NSAPs may be specified. When |
| multiple NSAPs are given, the ACSE layer of |
| FTAM will attempt to connect with NSAP1. If (and |
| only if) the connect fails, will NSAP2 be tried until |
| all NSAPs are tried. Omit any unused NSAP slots |
| including period(.). For example: 32.31.30.123456 |
| specifies one remote NSAP, 123456. |
DEFAULT | none |
OSICONF | yes |
54 | Chapter 2 |
