Configuring HP FTAM/9000
FTAM Parameters: ftam_conf
local_init | This parameter indicates that the subsequent |
| AEQ_enable parameter specified applies to |
| ftam_init. |
AEQ_enable This parameter decides if the Application Entity Qualifier (AEQ) will or will not be encoded and sent as part of the Calling Application Entity Title (AET) in the ACSE Association Request (AARQ) PDU. If it is set to 0, then the Calling AEQ will not be encoded and sent. If it is set to 1 or if this parameter is not defined, the default action is used. The default action is to encode and send the Calling AEQ. Also, for this parameter to be used, the Calling AET should have been defined in the local_app file.
FORMAT | decimal number |
UNITNA
RANGE 0 - 1
DEFAULT 1
OSICONF no
DYNAMIC yes
SCREEN NA
FIELDNA
Chapter 2 | 61 |
