HP UX 11i v2 Networking Software manual Maximum number of retries

Configuring HP FTAM/9000

FTAM Parameters: ftam_parms

DEFAULT 30

OSICONF no

DYNAMIC yes

SCREEN NA

FIELDNA

ft_recovery_err_retry This parameter allows you to configure the number of attempts that the FTAM initiator will re-send an F-RECOVER request when the FTAM responder is not ready to perform a recovery. The FTAM initiator will retry up to the number of retries configured as long as a negative F-RECOVER response is received and the current activity state is in progress for read or write. The value is only used if the ft_qos error class is set to 1 or 2.

FORMAT	decimal number
UNIT	maximum number of retries
RANGE	0 - 100
DEFAULT	2
OSICONF	no
DYNAMIC	yes
SCREEN	NA
FIELD	NA

Chapter 2 59