![](/images/new-backgrounds/1249343/24934319x1.webp)
USER’S INSTRUCTIONS
3.DISPLAYS DESCRIPTIONS
Standard display at
After
The volume can be adjusted through remote control or the Volume knob on the right, from
By using the remote control or selection knob, the different inputs can be selected: RCA1, XLR2, RCA3, XLR4, RCA5, XLR6, RCA7, XLR8.
By a slight push on the Volume knob the setup is activated. By turning the Selector knob to the right, the left channel balance is accessed. The balance is limited to 9dB difference between channels. Use the Volume knob to adjust the balance level.
Turn the Selector knob further to the right to access the right channel balance setting.
By further turning the Selector knob, the level of the input of each appliance can be adjusted accordingly up to – 10 dB.
Push lightly on the Selection knob to exit at any step from the
Last in the
This option is defaulted to OFF (disabled). Turn the volume knob right to enable it. Turning left sets it back to OFF.
10