Venturer ASR150 instruction manual Trouble Shooting Guide, Operating Voltage

TROUBLE SHOOTING GUIDE

The following checks will assist in the correction of most problems which you may encounter with your system.

PROBLEMS	SOLUTIONS
No power.	• Check that the AC power cord is connected.
No sound.	• Press the VOLUME + button to increase volume.
	• Ensure the MUTE button is not pressed on the remote control.
	• Ensure the INPUT SOURCE selection is correct.
No sound from one channel or	• Check the speaker connections of the inoperative channel.
unbalanced left and right	• Check the speaker cord connection and speaker location.
volume.	• Adjust individual speaker volumes (see page 10).
Reversed left and right sound.	• Check the speaker connection for proper phasing.
The centre speaker or the	• Check that the speaker connections are correct.
surround speakers give no	• The current mode does not support surround sound.
sound
The remote control does not	• Remove any obstacles between the remote control and the
function.	unit.
	• Use the remote control near the unit.
	• Point the remote control at the remote sensor on the unit.
	• Replace the battery in the remote control with new one.
	• If there is a clear plastic strip sticking out from the rear of the
	remote control, pull it out.

OPERATING VOLTAGE

Power consumption :	60W
Power requirements :	AC ~ 100V 50/60Hz (Japan)
	AC ~ 110V/120 - 220/240 50/60Hz (Other countries)
	AC ~ 120V	60Hz (USA and Canada)
	AC ~ 220V	50Hz (Hong Kong and China)
	AC ~ 230-240V 50Hz (Europe)
	AC ~ 240V	50Hz (Australia)

Specifications and external appearance are subject to change without advance notice due to continuous product improvement.

Printed in China 11 811-A15091-010