AssemblyHEADERInstructions
Read Instructions Carefully Before
Assembly:
1.Connect the two ends of the Power
Cord (between the Base and the Shaft) using the lock connectors.
2.Carefully tuck excess Power Cord into the Shaft. DO NOT CUT OR SHORTEN THE POWER CORD.
3.Insert the Gooseneck and the Shaft into the Base.
4.Check direction of the lamp and the hole on the Base, then use a Phillips Head Screwdriver (not included) to tighten the screw into the hole.
CAUTION: BE VERY CAREFUL NOT TO PINCH ANY PART OF THE CORD BETWEEN ANY METAL PIECES.
MISE EN GARDE : PRENDRE SOIN DE NE PAS PINCER LE CORDON DANS DES PIÈCES MÉTALLIQUES.
Fig. 1
7
