Bulb Removal or Installation
Removal
1. Unplug lamp from power source.
2. Remove metal wire guard by depressing the tab and lifting it out. (See Fig. 1)
3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. (See Fig. 2)
Installation | Fig. 1 |
1. Unplug lamp from power source. |
|
2. Firmly hold base (B) and push bulb (C) into the socket (A). (See Fig. 2 )
3. Be sure bulb is firmly seated in the socket (See Fig. 3 below) and snapped into the metal bulb clip (D).
4. Replace wire guard.
D
•Insert metal pegs at bottom of the wire guard into openings near the
bulb socket
• Snap tab into place as shown (Fig. 1)
|
| B |
| A | C |
| Fig. 2 | |
|
| |
Correctly seated bulb | Incorrectly seated bulb | |
Fig. 3 | No | Notice |
| gap | large |
|
| gap |
5
