Lexmark C522, C524, C520 manual Removing the 500-sheet drawer, Accessing the system board

Installing and removing options

Removing the 500-sheet drawer

If the printer location needs to change, or the printer and media handling options need to be shipped to a new location, all media handling options must be removed from the printer. For shipping, pack the printer and media handling options securely to avoid damage.

1Turn the printer off, and unplug the printer power cord.

2Disconnect all cables from the back of the printer.

3Remove any media from the standard bin.

4Remove any media from the multipurpose feeder, and close the multipurpose feeder.

5Lift the printer off of the optional drawer, and set the printer aside.

CAUTION: The printer weighs 25.40 kg (56 lb); therefore, it requires at least two people to lift it safely. Use the printer handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you set it down.

Accessing the system board

Note: This procedure requires a #2 Phillips screwdriver.

CAUTION: Turn the printer off, and unplug the power cord before continuing.

Note: See Using the security lock feature before attempting to access the system board.

Removing the 500-sheet drawer

119