Lexmark C520, C524, C522 manual Maintaining the printer, Replacing the fuser after long-term storage

Maintaining the printer

3Grasp the fuser by the handles and align it with its opening. Align the tab on the right with the groove. Align the u-shaped part on the left of the fuser with the u-shaped groove.

4Gently lower the fuser into place. Push it down until it is firmly seated.

5Turn the thumbscrews clockwise to tighten them.

Warning: Make sure the thumbscrews are tightened fully before closing the upper door.

6Close the upper door.

7Turn the printer on.

If the fuser is installed improperly or it is missing, 87 Fuser Missing appears on the operator panel. If this message appears, remove the fuser, and reinstall it correctly.

Replacing the fuser after long-term storage

88