Lexmark C524 Configuring printer alerts, Adjusting operator panel contrast, Setup Menu - Alarms

Administrative support

3Press until Disk Encryption appears, and then press .

4Press until Disable appears, and then press .

Contents will be lost. Continue? appears.

5Press until Yes appears, and then press . The Encrypting Disk progress bar appears.

6Press when the disk encryption finishes.

7Press until Exit Config Menu appears, and then press .

Configuring printer alerts

The printer may be configured in several ways to issue alerts to notify the user when it requires attention. To access these printer alert menu items:

1Make sure the printer is on and the Ready message appears.

2Press to enter the menus.

3Press until Settings appears, and then press .

4Press until Setup Menu appears, and then press .

5Press until Alarms, and then press .

6Press to go one of the following menu items listed in the table. Each menu item is a printer alert which can be

set. When the menu item needed shows a in front of it, press .

Setup Menu — Alarms

Menu item	Function	Value	Result
Alarm Control	Establishes whether the printer	Off	The alarm does not sound, but printing
	sounds an alarm when it requires		stops until the interventions are cleared.*
	operator intervention.
		Single	The printer stops printing, posts a
			message, and activates the selected alarm
		Continuous
			type.
Cartridge	Gives a choice on how the printer	Off	The printer posts a message and continues
Alarm	responds when cartridge life is		printing.
	low.
		Single	The printer stops printing, posts a
			message, and activates the selected alarm
		Continuous
			type.

* If multiple attendance conditions are pending, the alarm only sounds when the first message appears. No additional alarms sound as subsequent attendance conditions arise.

Selecting Auto Continue in Print Recovery in the Setup Menu in Settings may affect how the printer alerts execute. This setting defines how long the printer waits after displaying a message before it resumes printing. For more information, see the Menus and Messages Guide located on the publications CD for more information.

Adjusting operator panel contrast

The LCD operator panel contrast can be adjusted through the Utilities Menu in Settings. For more information, see the Menus and Messages Guide located on the publications CD.

Configuring printer alerts

108