Lexmark C520 Restoring factory default settings, Adjusting Power Saver, Administrative support

Administrative support

Restoring factory default settings

When first entering the printer menus from the operator panel, notice an asterisk (*) next to a value in the menus. This asterisk indicates the factory default setting. These settings are the original printer settings. (Factory defaults may vary for different countries and regions.)

When a new setting is selected from the operator panel, the Saved message appears. When the Saved message disappears, an asterisk appears next to the setting to identify it as the current user default setting. These settings are active until new ones are stored or the factory defaults are restored.

To restore the original printer factory default settings:

1Make sure the printer is on and the Ready message appears.

2Press to enter the menus.

3Press until Settings appears, and then press .

4Press until Setup Menu appears, and then press .

5Press until Factory Defaults appears, and then press .

6Press until Restore Now appears, and then press .

The message Restoring Factory Defaults appears, followed by the Ready message.

When Restore is selected:

•No other button actions are available on the operator panel while Restoring Factory Defaults appears.

•All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.)

•All menu settings are returned to the factory default values, except:

–The operator panel Display Language setting in the Setup Menu.

–All settings in the Parallel Menu, Serial Menu, Network Menu, and USB Menu.

Adjusting Power Saver

To adjust the Power Saver setting in the Setup Menu:

1Make sure the printer is on and the Ready message appears.

2Press to enter the menus.

3Press until Settings appears, and then press .

4Press until Setup Menu appears, and then press .

5Press until Power Saver. appears, and then press .

6Press or to decrease or increase the number in the scale for the desired number of minutes, and then

press .

Minute settings available range from 1–240. The menu value Disabled is also available if Energy Conserve is set to Disabled.

The Submitting Selection message appears.

Note: The Power Saver setting may also be adjusted by issuing a Printer Job Language (PJL) command. For more information, see the Technical Reference available on our Lexmark Web site at www.lexmark.com.

Restoring factory default settings

106